Urine Testing Method Developed for Ureterolithiasis
By LabMedica International staff writers Posted on 03 Jun 2020 |
Image: FlexStation 3 Microplate Reader measures absorbance, fluorescence intensity, fluorescence polarization, luminescence, and time-resolved fluorescence (Photo courtesy of Molecular Devices).
Ureterolithiasis (nephrolithiasis or kidney stones) is a disease affecting the urinary tract. Kidney stones occur due to buildup of certain salts and minerals that form crystals, which in turn stick together and enlarge to form a hard mass in the kidneys. The stones move into the urinary tract and can cause blood in the urine, considerable pain and blockages in the urinary system.
Metabolic testing of a kidney stone patient’s urine to identify metabolites such as minerals and solutes that cause stones to form is key for preventing future ones. This testing is currently done by requiring the patient to collect their urine over a 24-hour period in a large container. The container is then sent to a laboratory for analysis and the results normally come back in 7 to 10 days.
Scientists from the Pennsylvania State University (University Park, PA, USA) and their colleagues developed SLIPS-LAB (Slippery Liquid-Infused Porous Surface Laboratory), a droplet-based bioanalysis system, for rapid measurement of urinary stone–associated analytes. The ultra-repellent and antifouling properties of SLIPS, which is a biologically inspired surface technology, allow autonomous liquid handling and manipulation of physiological samples without complicated sample preparation procedures and supporting equipment.
The team used enzymatic and colorimetric assay kits to measure metabolic profiles in urine. The uric acid assay was obtained from BioAssay Systems (Hayward CA, USA). Calibration experiments were performed using SLIPS-LAB and a FlexStation 3 microplate reader (Molecular Devices, San Jose, CA, USA). The performance of SLIPS-LAB for a spot urine test was compared with manual procedures in 96-well plates. A validation study was performed using SLIPS-LAB for detecting urine samples from patients with urinary stones.
The six-plex SLIPS-LAB device was designed for metabolic evaluation of urinary stone disease. The device conducts colorimetric and enzymatic assays in parallel for detecting calcium, citrate, uric acid, oxalate, and pH, which are among the most clinically relevant urinary analytes to assess stone risk and treatment response. The urinary stone–associated analytes of 24-hour urine samples from 15 individuals were examined using SLIPS-LAB. To study the metabolic profiles, the data were normalized to typical physiological values of 24-hour urine.
The test results can then be read using a scanner or a cell phone, and the scanned image can then be analyzed using a computer algorithm. All these steps, according to the authors, would take approximately 30 minutes in a physician’s office. An added benefit, they said, is that SLIPS-LAB is more cost-effective than regular, 24-hour testing.
Pak Kin Wong, PhD, professor of biomedical engineering and the principal investigator of the study, said, “We demonstrated that SLIPS-LAB enables the reagent and sample to move themselves and perform the reactions for us. It means the technology doesn’t require a technician to run any test machinery, so it is possible to do the test in non-traditional settings, like a physician’s office or even the patient’s home.”
The authors concluded that SLIPS-LAB will allow detection in a timely and cost-efficient manner and provide actionable diagnostic information and personalized treatment suggestions to individuals with urinary stone disease. The study was published on May 22, 2020 in the journal Science Advances.
Metabolic testing of a kidney stone patient’s urine to identify metabolites such as minerals and solutes that cause stones to form is key for preventing future ones. This testing is currently done by requiring the patient to collect their urine over a 24-hour period in a large container. The container is then sent to a laboratory for analysis and the results normally come back in 7 to 10 days.
Scientists from the Pennsylvania State University (University Park, PA, USA) and their colleagues developed SLIPS-LAB (Slippery Liquid-Infused Porous Surface Laboratory), a droplet-based bioanalysis system, for rapid measurement of urinary stone–associated analytes. The ultra-repellent and antifouling properties of SLIPS, which is a biologically inspired surface technology, allow autonomous liquid handling and manipulation of physiological samples without complicated sample preparation procedures and supporting equipment.
The team used enzymatic and colorimetric assay kits to measure metabolic profiles in urine. The uric acid assay was obtained from BioAssay Systems (Hayward CA, USA). Calibration experiments were performed using SLIPS-LAB and a FlexStation 3 microplate reader (Molecular Devices, San Jose, CA, USA). The performance of SLIPS-LAB for a spot urine test was compared with manual procedures in 96-well plates. A validation study was performed using SLIPS-LAB for detecting urine samples from patients with urinary stones.
The six-plex SLIPS-LAB device was designed for metabolic evaluation of urinary stone disease. The device conducts colorimetric and enzymatic assays in parallel for detecting calcium, citrate, uric acid, oxalate, and pH, which are among the most clinically relevant urinary analytes to assess stone risk and treatment response. The urinary stone–associated analytes of 24-hour urine samples from 15 individuals were examined using SLIPS-LAB. To study the metabolic profiles, the data were normalized to typical physiological values of 24-hour urine.
The test results can then be read using a scanner or a cell phone, and the scanned image can then be analyzed using a computer algorithm. All these steps, according to the authors, would take approximately 30 minutes in a physician’s office. An added benefit, they said, is that SLIPS-LAB is more cost-effective than regular, 24-hour testing.
Pak Kin Wong, PhD, professor of biomedical engineering and the principal investigator of the study, said, “We demonstrated that SLIPS-LAB enables the reagent and sample to move themselves and perform the reactions for us. It means the technology doesn’t require a technician to run any test machinery, so it is possible to do the test in non-traditional settings, like a physician’s office or even the patient’s home.”
The authors concluded that SLIPS-LAB will allow detection in a timely and cost-efficient manner and provide actionable diagnostic information and personalized treatment suggestions to individuals with urinary stone disease. The study was published on May 22, 2020 in the journal Science Advances.
Latest Clinical Chem. News
- 3D Printed Point-Of-Care Mass Spectrometer Outperforms State-Of-The-Art Models
- POC Biomedical Test Spins Water Droplet Using Sound Waves for Cancer Detection
- Highly Reliable Cell-Based Assay Enables Accurate Diagnosis of Endocrine Diseases
- New Blood Testing Method Detects Potent Opioids in Under Three Minutes
- Wireless Hepatitis B Test Kit Completes Screening and Data Collection in One Step
- Pain-Free, Low-Cost, Sensitive, Radiation-Free Device Detects Breast Cancer in Urine
- Spit Test Detects Breast Cancer in Five Seconds
- Electrochemical Sensors with Next-Generation Coating Advances Precision Diagnostics at POC
- First-Of-Its-Kind Handheld Device Accurately Detects Fentanyl in Urine within Seconds
- New Fluorescent Sensor Array Lights up Alzheimer’s-Related Proteins for Earlier Detection
- Automated Mass Spectrometry-Based Clinical Analyzer Could Transform Lab Testing
- Highly Sensitive pH Sensor to Aid Detection of Cancers and Vector-Borne Viruses
- Non-Invasive Sensor Monitors Changes in Saliva Compositions to Rapidly Diagnose Diabetes
- Breakthrough Immunoassays to Aid in Risk Assessment of Preeclampsia
- Urine Test for Monitoring Changes in Kidney Health Markers Can Predict New-Onset Heart Failure
- AACC Releases Comprehensive Diabetes Testing Guidelines