Paper-Based Microneedle Skin Patch for Continuous Glucose Monitoring
By LabMedica International staff writers Posted on 23 Sep 2020 |
Image: Illustration demonstrating painless and biodegradable microneedles on a paper patch (Photo courtesy of University of Tokyo)
A microneedle skin patch for the continuous monitoring of an individual’s glucose level was designed to be a painless and disposable screening and diagnostic test for diabetes patients, as well as those with pre-diabetes.
Porous microneedles are expected to have a variety of potential applications in diagnostics owing to their ability to penetrate human skin painlessly and extract bio‐fluid by capillary action. Investigators at the University of Tokyo (Japan) have applied this technology for screening and monitoring levels of glucose.
The microneedles were fabricated by pouring a mixture of a melted biodegradable polymer and salt into the cone-shaped cavities of a micro-mold while applying heat. The mold was then inverted with the needles on the lower side, and the device was placed on top of a sheet of paper with high pressure applied from above. The high pressure forced the polymer mixture into the pores of the paper, securing the attachment and allowing fluid drawn through the needles to pass effortlessly into the paper. After removal from the mold, the needles were cooled in a solution that removed the salt, leaving behind pores, through which fluid could flow into the paper. A paper glucose sensor was then attached to the paper base of the needle array. The final product was disposable and biodegradable, and its use did not require any medical expertise or training.
The paper‐based glucose sensor was used to demonstrate the absorption property of the microneedles, and showed successful sample extraction and glucose concentration analysis from agarose gel‐based skin mimics. The investigators maintained that the platform had the potential to integrate various different paper‐based bio‐sensors in order to function as painless and disposable rapid screening and diagnostic tests for many metabolites.
"We have overcome this problem by developing a way to combine porous microneedles with paper-based sensors," said senior author Dr. Beomjoon Kim, professor in the institute of industrial science at the University of Tokyo. "The result is low-cost, disposable, and does not require any additional instruments."
The microneedle device was described in the August 2020 issue of the journal Medical Devices & Sensors.
Related Links:
University of Tokyo
Porous microneedles are expected to have a variety of potential applications in diagnostics owing to their ability to penetrate human skin painlessly and extract bio‐fluid by capillary action. Investigators at the University of Tokyo (Japan) have applied this technology for screening and monitoring levels of glucose.
The microneedles were fabricated by pouring a mixture of a melted biodegradable polymer and salt into the cone-shaped cavities of a micro-mold while applying heat. The mold was then inverted with the needles on the lower side, and the device was placed on top of a sheet of paper with high pressure applied from above. The high pressure forced the polymer mixture into the pores of the paper, securing the attachment and allowing fluid drawn through the needles to pass effortlessly into the paper. After removal from the mold, the needles were cooled in a solution that removed the salt, leaving behind pores, through which fluid could flow into the paper. A paper glucose sensor was then attached to the paper base of the needle array. The final product was disposable and biodegradable, and its use did not require any medical expertise or training.
The paper‐based glucose sensor was used to demonstrate the absorption property of the microneedles, and showed successful sample extraction and glucose concentration analysis from agarose gel‐based skin mimics. The investigators maintained that the platform had the potential to integrate various different paper‐based bio‐sensors in order to function as painless and disposable rapid screening and diagnostic tests for many metabolites.
"We have overcome this problem by developing a way to combine porous microneedles with paper-based sensors," said senior author Dr. Beomjoon Kim, professor in the institute of industrial science at the University of Tokyo. "The result is low-cost, disposable, and does not require any additional instruments."
The microneedle device was described in the August 2020 issue of the journal Medical Devices & Sensors.
Related Links:
University of Tokyo
Latest Molecular Diagnostics News
- Blood Test Accurately Predicts Lung Cancer Risk and Reduces Need for Scans
- Unique Autoantibody Signature to Help Diagnose Multiple Sclerosis Years before Symptom Onset
- Blood Test Could Detect HPV-Associated Cancers 10 Years before Clinical Diagnosis
- Low-Cost Point-Of-Care Diagnostic to Expand Access to STI Testing
- 18-Gene Urine Test for Prostate Cancer to Help Avoid Unnecessary Biopsies
- Urine-Based Test Detects Head and Neck Cancer
- Blood-Based Test Detects and Monitors Aggressive Small Cell Lung Cancer
- Blood-Based Machine Learning Assay Noninvasively Detects Ovarian Cancer
- Simple PCR Assay Accurately Differentiates Between Small Cell Lung Cancer Subtypes
- Revolutionary T-Cell Analysis Approach Enables Cancer Early Detection
- Single Genetic Test to Accelerate Diagnoses for Rare Developmental Disorders
- Upgraded Syndromic Testing Analyzer Enables Remote Test Results Access
- Respiratory and Throat Infection PCR Test Detects Multiple Pathogens with Overlapping Symptoms
- Blood Circulating Nucleic Acid Enrichment Technique Enables Non-Invasive Liver Cancer Diagnosis
- First FDA-Approved Molecular Test to Screen Blood Donors for Malaria Could Improve Patient Safety
- Fluid Biomarker Test Detects Neurodegenerative Diseases Before Symptoms Appear